4 Links

2"X4" Mandrel Bent Back Half Frame Rails

Precision Mandrel Bent Frame Rails. 2" x 4" high strength rectangular steel tubing, 3/16" steel wall thickness, Total length 8.69-feet per rail.

2"X4" Mandrel Bent Back Half Frame Rails

S10 100% Bolt on 4 link

S10 100% Bolt on 4 link kit includes KYB GR2 Shocks, Raised Gas Tank Xmember & Grade 8 Hardware.

Will lay up to 20" rims with the bolt in notch.

22" rims will need a weld-On notch.

S10 100% Bolt on 4 link

S10 100% Bolt on 4 link w/ Cantilever Upgrade

S10 100% Bolt on 4 link kit includes KYB GR2 Shocks, Raised Gas Tank Xmember & Grade 8 Hardware with Cantilever Upgrade. Will lay up to 20" rims with the bolt in notch. 22" rims will need a weld-On notch.

PICTURE SHOWS BAGS BUT ARE NOT INCLUDED WITH THE KIT. THEY CAN BE PURCHASED ON THE BAGS PAGE. ALSO SHOWN IS THE BOLT IN NOTCH THAT IS AN OPTION BELOW.

S10 100% Bolt on 4 link w/ Cantilever Upgrade

Economy Universal Triangulated 4 Link Kit

Adjustable 3/4-16 RH rod ends, 1" 3/16 wall tubing (2) 36"
bars (2) 24" bars, 1/4" thick tabs, grade 8 hardware

Part #110644

Economy Universal Triangulated 4 Link Kit

Universal Triangulated 4 Link Kit Fully Adj

FULLY ADJ. 3/4-16 RH/LH rod ends, 1" 3/16 wall tubing (2) 36" bars (2) 24" bars, 1/4" thick tabs.grade 8 hardware.

Part #110294

Universal Triangulated 4 Link Kit Fully Adj

Universal Triangulated 4 Link Kit

Adjustable 3/4-16 RH rod ends, 1.5" 1/4 wall tubing (2) 36"
bars (2) 24" bars, 1/4" thick tabs, grade 8 hardware

Part #110641

Universal Triangulated 4 Link Kit

Universal Triangulated 4 Link Kit Fully Adj.

FULLY ADJ. 3/4-16 RH/LH rod ends, 1.5" 1/4 wall tubing (2) 36" bars, (2) 24"bars, 1/4" thick tabs, grade 8 hardware.

Part #108164

Universal Triangulated 4 Link Kit Fully Adj.

Super Pivot Universal Triangulated 4 Link

Adjustable 3/4-16 RH rod ends, 1.5" 1/4 wall tubing (2) 24" bars (2) 36" bars 1/4" thick tabs, grade 8 hardware
This kit has 4 SUPER PIVOT Joints

Part #110659

Super Pivot Universal Triangulated 4 Link

Super Pivot Triangulated 4 Link Fully Adj

Fully Adjustable 3/4-16 RH/LH rod ends, 1.5" 1/4 wall tubing (2) 24" bars (2) 36" bars 1/4" thick tabs, grade 8 hardware This kit has 8 Super Pivot Joints! Not 4 like the competition!

Part #108601

Super Pivot Triangulated 4 Link Fully Adj

Super Lift Triangulated 4 Link Kit

Adjustable ON ONE END 1-1/8 RH rod ends, 1.5" 1/4 wall
upper bars (2) 24" bars/ 2" square 1/4 wall lower bars (2) 36" bars 1/4" thick tabs, grade 8 hardware

Part #110626

Super Lift Triangulated 4 Link Kit

Super Lift Triangulated 4 Link Kit Fully Adj

Fully Adjustable 1-1/8 RH/LH rod ends, 1.5" 1/4 wall
upper bars (2) 24" bars/ 2" square 1/4 wall lower bars (2) 36" bars 1/4" thick tabs, grade 8 hardware

Part #110333

Super Lift Triangulated 4 Link Kit Fully Adj

Parallel 4 Link kit

Parallel 4 Link kit (4) 36" 1.5" bars, RH 3/4-16 bushings for easy adjustability grade 8 hardware DOES NOT INCLUDE PANHARD BAR

Part #110660

Parallel 4 Link kit

Parallel 4 Link kit Fully Adjustable

Fully Adjustable Parallel 4 Link kit 4 36" 1.5" bars, RH & LH 3/4-16 bushings for easy adjustability grade 8 hardware
DOES NOT INCLUDE PANHARD BAR

Part #101745

Parallel 4 Link kit Fully Adjustable

Parallel 4 Link kit Heavy Duty

Parallel 4 Link kit 4 36" 1.5" bars, RH 1 1/8 bushings for easy
adjustability grade 8 hardware.

DOES NOT INCLUDE PANHARD BAR

Part #117780

Parallel 4 Link kit Heavy Duty

Panhard Bar Kit

Panhard Bar Kit 3/4 Heim weld-on axle bracket for 3" axle

Part #107633

Panhard Bar Kit

Bolt On S10 Cantilever Rear Back Half

*New Gas Tank X-member: Replaces your old one. It is raised up so that you have plenty of driveshaft clearance. Also serves as your upper link mounting x-member. Mounting bolts are included. *Wishbone: Made from 1.5" DOM 3/16" wall seamless tubing. Very burly! The end links are 1/4" thick and enclose Urethane bushings. TIG welded for superior strength. *Differential Brackets: We decided to step above the rest of the bolt-on differential brackets. This bracket uses all 10 of the existing mounting bolts instead of just the top 5. Using all 10 bolts doubles the strength of the wishbone mounting location. To space this bracket out away from the cover lip, we use a ring that presses tightly against the pan to prevent any possible fluid leaks. Laser cut from 1/4" HR plate, and press formed. Mounting bolts are included. *Adjustable Lower Bars: Made from 1.5" DOM 1/4" wall seamless tubing. We CNC cut and thread these bars to get a very precise thread fit. Our thread size is a whopping 1-1/8" in size. The end links are 1/4" thick and enclose Urethane bushings. TIG welded for superior strength. *Axle Brackets: Laser cut from 1/4" thick HR plate. *Gas Charged GR2 Shocks. *Rear Lift Systems: This is where the magic of lift happens. This kit allows you to lay frame on 24's, and gets you right around 12-13" of lift. *Hardware: You get all the necessary grade 8 bolts to install your kit. All the pivot links come with Urethane bushings. *Chassis Grounds: Ground points for taillights are recreated at rear of frame for easy hookup. Special self-threading bolts provide a secure ground connection at the front of the new rails. *Instructions: 20 page installation booklet provided. 5 gal tank pictured is extra and comes prewelded to the crossmember and engineered not to drag. *Fits 82-03 S-series pickups, extended cab and standard cab short bed. Does not fit longbed!

Beautiful Powder Coat in your choice of colors.

Anthracite, Blazing Yellow, Candy Metallic Blue, Candy Metallic Green, Candy Metallic Orange, Candy Metallic Red, Death Bed Red, Metallic Copper, Metallic Nickle Pewter, Metallic Purple, Metallic Silver, Pearlescent White, Pink, and Wet Black. PLEASE ENTER YOUR COLOR CHOICE AT THE CHECKOUT. Also Choose your bags from Dominator 2600, Slam RE7, or Slam RE8.

Bolt On S10 Cantilever Rear Back Half

Cantilever Rear Lift System

The kit includes 2 weld in frame plates that place the 2 crossmembers exactly where they need to be. The crossmember tubes are 48" long so you can have them go through your factory frame rail to really strengthen it all up. The upper shock mount is built into the Canti Arm Bracket. It is also available without the shock mount in case you have different shock mounting plans. This kit will give you 12" or more of lift.

Cantilever Rear Lift System

63-72 C10 Rear Wishbone Super Lift System

This kit includes:63-72 Step Notch, Shocks, Upper Machined Shock Bar. Upper Wishbone Link & Axle Tabs,
Lower Lift Bars, Lower Shock/Link Bar Mounts, Inner Frame Structuring Gussets, Outer Frame Plate Upper Bag Mounts. Main Wishbone Support Crossmember, and Carrier Bearing Crossmember.

63-72 C10 Rear Wishbone Super Lift System

100% Bolt-on S10 3-Link Kit

S10 4-Link Kit

This kit is basically the same as our S10 3-Link, except the upper wishbone link is replaced with 2 triangulated bars. This kit is designed to be used without the factory gas tank.

S10 4-Link Kit

Parallel 4-Link Kit

This Fully Adjustable Parallel 4-Link kit is crazy! It is HUGE! It is FAT! All the mounting brackets are CNC laser cut and made from a whopping 1/4" thick steel plate. Just like they should be. The bars are made from high quality seamless DOM tubing and have a 1/4" wall thickness. The threads inside the bars are CNC cut on a lathe. The threaded studs on the bar ends are also CNC cut on a lathe. All the "BIG FAT" welds on the bars are TIG welded for superior strength. There are no imperfections here. The thread size we use is 1-1/8" in diameter.

***Note: MUST USE PANHARD BAR OR WATTS LINK***

Parallel 4-Link Kit

Panhard Bar Kit

This item is a must when running a parallel 4 link. Available in sizes 15"-37". Kit includes: frame mounting tabs, panhard bar, 3/4" heim joint, and weld on axle bracket.

Note: At the checkout, please specify axle size 2.75", 3", 3.5" or 4" and bar length 15" thru 37".

Panhard Bar Kit

Panhard Bar Unwelded Kit

Everything included in this kit is the same as our Panhard Bar Welded Kit, except the bar is unwelded so you can build it yourself. Uses a simple weld-in bung so its super easy to put together. Comes with a 36" bar.

Note: Please specify axle size at checkout.

Panhard Bar Unwelded Kit

Watts Link Universal Kit

This kit includes the following...1 Main Axle Bracket with 2 precision sealed bearings with an internal crush sleeve.
2 Weld on Axle mounts.2 pcs of 1.25 OD link tubing (22" long each).4 3/4-16 weld in threaded bungs.4 Chromoly / Teflon trunnion heims 3/4-16 w/Jamnuts.4 chassis mounting tabs for link bars (1/4" thick).2 center pivot plates (1/4" thick) Grade 8 mounting hardware.

Note: Please specify axle size at checkout.

Watts Link Universal Kit

TB S-10 5-Link Back Half Bolt-On

*New Gas Tank X-member: Replaces your old one. It is raised up so that you have plenty of driveshaft clearance. Also serves as your upper link mounting x-member. Mounting bolts are included.*Wishbone: Made from 1.5" DOM 3/16" wall seamless tubing. Very burly! The end links are 1/4" thick and enclose Urethane bushings. TIG welded for superior strength.*Differential Brackets: We decided to step above the rest of the bolt-on differential brackets. This bracket uses all 10 of the existing mounting bolts instead of just the top 5. Using all 10 bolts doubles the strength of the wishbone mounting location. To space this bracket out away from the cover lip, we use a ring that presses tightly against the pan to prevent any possible fluid leaks. Laser cut from 1/4" HR plate, and press formed. Mounting bolts are included.*Adjustable Lower Bars: Made from 1.5" DOM 1/4" wall seamless tubing. We CNC cut and thread these bars to get a very precise thread fit. Our thread size is a whopping 1-1/8" in size. The end links are 1/4" thick and enclose Urethane bushings. TIG welded for superior strength.*Axle Brackets: Laser cut from 1/4" thick HR plate. These weld to the bottom of the axle and hold the lower link bars in place while also providing an attachment point for the lift bars.*Upper Shock Bar: The Upper Shock Bar mounts behind the 2 step notches but low enough to stay under your bed floor.*Gas Charged GR2 Shocks.*Rear Lift Systems: This is where the magic of lift happens. The 2 lift bars are made from 1.75" square tube with a 3/16" wall thickness. The lower bag mount is built into the Lift Bars while the upper bag mount is built into the new frame rails. This lift kit allows you to lay frame on 24's, and gets you right around 12-13" of lift. Since the bags are mounted on the lift bars, the ride quality is much softer and not as bouncy like a bag over axle set up.*Hardware: You get all the necessary grade 8 bolts to install your kit. All the pivot links come with Urethane bushings.*Chassis Grounds: Ground points for taillights are recreated at rear of frame for easy hookup. Special self-threading bolts provide a secure ground connection at the front of the new rails.*Instructions: 20 page installation booklet provided. 5 gal tank pictured is extra and comes prewelded to the crossmember and engineered not to drag.*Fits 82-03 S-series pickups, extended cab and standard cab short bed. Doesn't fit longbed!

Beautiful Powder Coat in your choice of colors.

TB S-10 5-Link Back Half Bolt-On

S10 5 link Wishbone Kit

New Gas Tank X-member Replaces your old one. It is raised up so that you have plenty of driveshaft clearance. Also serves as your upper link mounting x-member. Mounting bolts are included.*Wishbone: Made from 1.5" DOM 3/16" wall seamless tubing. Very burly! The end links are 1/4" thick and enclose Urethane bushings. TIG welded for superior strength.*Differential Brackets: We decided to step above the rest of the bolt-on differential brackets. This bracket uses all 10 of the existing mounting bolts instead of just the top 5. Using all 10 bolts doubles the strength of the wishbone mounting location. To space this bracket out away from the cover lip, we use a ring that presses tightly against the pan to prevent any possible fluid leaks. Laser cut from 1/4" HR plate, and press formed. Mounting bolts are included.*Adjustable Lower Bars: Made from 1.5" DOM 1/4" wall seamless tubing. We CNC cut and thread these bars to get a very precise thread fit. Our thread size is a whopping 1-1/8" in size. The end links are 1/4" thick and enclose Urethane bushings. TIG welded for superior strength.*Axle Brackets: Laser cut from 1/4" thick HR plate. These weld to the bottom of the axle and hold the lower link bars in place.*S10 Specific Step Notches: This weld in Notch is cut specifically to match the shape of the S10 frame rail. No trimming of the side plates is required. Perfect fit!*Upper Shock Bar: The Upper Shock Bar mounts between the 2 step notches and has our new super strong shock mounts already welded in place for you. We use 1.5" DOM tube for our shock bar. It has a 3/16" wall thickness so you know that it is well overbuilt.*Gas Charged GR2 Shocks.*Choice of Dominator 2600, Slam RE7, or Slam RE8 1/2" Ported Bags:*Rear Lift Systems: This is where the magic of lift happens. The Rear Lift System consists of 2 lift bars made from 1.75" square tube with a 3/16" wall thickness, Upper Bag X-member (bolts in), Lift Bar Attachment X-member (bolts in), and the axle bracket to which the Lift Bars and linkage plates attach to (weld on). The lower bag mount is built into the Lift Bars. This lift kit allows you to lay frame on 20's, and gets you right around 11.5" of lift. Since the bags are mounted on the lift bars, the ride quality is much softer and not as bouncy like a bag over axle set up.*Hardware: You get all the necessary grade 8 bolts to install your kit.

Beautiful Powder Coat in your choice of colors.

S10 5 link Wishbone Kit

S10 3-Link Kit

This 3-Link kit with fit all S10's, Sonomas, and the newer S10 style Isuzu Hombre. Sorry Blazer owners, it won't fit. This kit is real easy to install. The whole upper link system is bolt on. The kit comes with a new gas tank x-member that raises your tank, and simply bolts in where the factory one used to be. The differential bracket uses all 10 bolts, not just 5 like with other kits. The wishbone and lower bars are built from beefy 1.5" diameter DOM seamless tubing. Mounting Tabs, Poly Bushings and all Grade 8 mounting hardware is included.

S10 3-Link Kit

Sales, Service, and Installation (937)710-4901