| Drop Spindles DJM Drop Spindles. McGaughys Drop Spindles BellTech Drop Spindles Crossmembers | | HID Kits Due to the power of the 55W ballast, the output is slightly washed out as seen above. We sell bulbs with kelvin ratings that range from 3000K to 12000K. 3k being yellow and 12k being the bluish in color. The most popular color we sell is 6000k. That would be described as white with a hint of blue. For maximum visibility, we would recommend staying within 4500K-6000K. The closer the color is to natural sunlight, the more you will see on the road. You will lose visibility when going towards 12000k. Most people who do 10000-12000k are going for a specific look. The Ballast are what controls the brightness of the output while the bulb will reflect the color of the light. Note: All projectors can vary in color. Our colors are true to our description. Bulb colors can appear to be different based on outside factors, such as the type of headlight you are putting them in and they way the light is being reflected or projected out of them. Mid Sized HID Kit (35W or 55W) Introducing our Mid Sized HID kit. Mid Sized Hid Kits have the same width and length as it's predecessor, but are 3/8" thicker. These full size ballasts are nearly bulletproof; bringing reliability and value in one.
All kits use AC bulbs and ballasts for increased reliability and lifespan. What is the difference between 55w and 35w kits?
Our 55w HID kits are 40% brighter than the standard 35w kits.
The 55W system ballasts are about 1 cm longer than the 35W ballasts.
55w kits tend to wash out some of the color of the HID bulb due to the light output (for example, a 55w 8000k will look similar in color to a 35w 6000k kit).
Our 55w HID Kit is not recommended for smaller fog light housings because they tend to concentrate a large amount of heat in a small area.
Each Kit Includes: - 2 Fullsize Raptor Ballast
- 2 HID Bulbs
- Free Lifetime Warranty
*Please keep in mind, certain vehicles may require you to run additional accessories for the HID kit to work properly.
High / Low kits come with a fused relay harness and controller that regulates the high / low operation.
Use the relay harness to connect HIDs to cars with very small gauge wiring that cannot supply the initial surge current required to light the bulbs reliably.
Recommended for all 55W HID installations but most American and European cars work at 35W/55W without the harness. The harness is definitely recommended for Quad's and other ATVs or when running multiple HID installations. This harness is a fused relay isolation harness capable of supplying 40A at 12vdc. At Checkout please tell us what bulb color you would like 3000K, 4500K, 5000K, 6000K, 8000K, 10000K, or 12000K. Also select the correct line with your bulb choice.
| Mid Sized HID Kit 35 watt | | |
| Mid Sized HID Kit 55 watt | | |
HID Kit Slim Ballast (35W or 55W) HID Kits for any car, truck, or SUV. Finally, a great priced, slim ballast, fully digital, HID kit available in 55w and 35w.
Fully digital, draws less than 6 amps at start up and 3.4 amps at normal operating temperature. This system provides 3200-3400 Lumens at 35 watts and an amazing 5000 Lumens at 55 watts per bulb. In comparison, a typical halogen bulb produces 900-1200 lumens.
All kits use AC bulbs and ballasts for increased reliability and lifespan. What is the difference between 55w and 35w kits?
Our 55w HID kits are 40% brighter than the standard 35w kits.
The 55W system ballasts are about 1 cm longer than the 35W ballasts.
55w kits tend to wash out some of the color of the HID bulb due to the light output( for example, a 55w 8000k will look similar in color to a 35w 6000k kit).
Our 55w HID Kit is not recommended for smaller fog light housings because they tend to concentrate a large amount of heat in a small area.
Full HID Kit Includes:
- 2 Digital Slim ballasts
- 2 HID Bulbs
- Life-Time Warranty *High / Low kits come with a fused relay harness and controller that regulates the high / low operation.*
Will this HID kit work on my vehicle? Simply put, yes; we have our own bulbs, not sold anywhere else, in every bulb type. Be sure that the kit itself will work with your cars electrical systems, some modern cars requires BOWs and harnesses in order to run at 100%!
Drag Blocks Titanium Drag Blocks 
| | Train Horns Classic Train Horn (HB4H) 
This four piece train horn kit is simply the loudest in it's class. They not only have a genuine locomotive train sound but they even sound at 148db at only 100PSI. These horns are constructed of fiberglass reinforced ABS plastic which is lightweight and extremely durable. Without an adjoining manifold, the horns can be installed separately so they fit almost anywhere on pretty much every car or truck. The horns also feature power air flow technology that allows them to use very little air to create a loud sound, and let you honk the horn for longer. 1/4" Valve.
| Classic Train Horn | | |
Rocker Train Horn 
This two piece train horn kit is simply the loudest in it's class. The horns are constructed with fiberglass reinforced ABS plastic, and are almost impossible to damage. Since the bells do not share a manifold, they can be independently mounted, making installation on any vehicle a breeze. Plus, the stainless steel diaphragms in these horns will never rust, so the bells will keep their genuine locomotive sound. Besides, This thing is loud! 3/8" Valve
| Rocker Train Horn | | |
Shocker XL Train Horn 
This four piece train horn kit is simply the loudest in it's class. These horns are constructed of fiberglass reinforced ABS plastic which is lightweight and extremely durable. Without an adjoining manifold, the horns can be installed separately so they fit almost anywhere on pretty much every car or truck. The horns also feature power air flow technology that allows them to use very little air to create a loud sound, and let you honk the horn for longer. They not only have a genuine locomotive train sound but they are lightweight, extremely durable and sound at 148db at only 100PSI. 1/2" Valve.
| Shocker XL Train Horn | | |
Nathan AirChime K5LA Train Horn (K5)  The Nathan K5LA is the god father of all train air horns! Still in use today, the Nathan K5 is used on commercial locomotives all around the country this AirChime train horn is of the highest quality construction and guarantees amazing performance! The K5 incorporates five heavy duty die-cast kettle drum bells with a high flow five way manifold. The K5LA horn is the real deal: not only is it the loudest horns we've ever sold, but a genuine locomotive air horn. It doesn't imitate the sound you hear from diesel locomotives; it is the sound you hear from diesel locomotives. You'll be heard for miles with a set of these horns! 156db. Nathan AirChime K3LA Train Horn (K3) 
The Nathan AirChime K3 has long been the leader in commercial railway horns. This horn is the most commonly used horn on diesel locomotives across the US and is the same horn everyone's familiar with when a diesel locomotive barrells down its tracks. This K3LA is an American tuned version of the K3 with a low-profile mount to make it easier to install on trucks (not intentionally). The K3LA is an amazing horn and delivers unbelievable power. Honestly its very hard to describe just how loud these horns are. If you want a real horn, this is the answer. 156 db. | |