New Items
MMW S-10 No Notch Tie Rods
These kits allow you to run a large wheel and tire combo, and DO NOT require you to weaken your frame by cutting a big ole notch in it for your tie rods. These will work up to a 24" wheel and tire combo, without issues. Powder Coating available in any color. Please specify color at checkout.
200PSI Dual-OB2 Basic OBA Kit 200PSI Dual-OB2 Pro OBA Kit
This super fast 200PSI Dual-OB2 Basic This superior quality 200PSI Dual-OB2
On-Board Air Compressor Kit can quickly Professional On-Board Air Compressor
fill up a 5 gallon air tank from 165-psi to Kit comes with everything for your high
200-psi in just 40 seconds! performance air suspension systems.
Kit Contents: Kit Contents:
■ 2x OB2 air compressors. ■ 2x OB2 air compressors.
■ 1x 5-gallon aluminum chrome air tank. ■ 1x 5-gallon aluminum chrome air tank.
■ 1x adjustable pressure switch. ■ 1x 200-psi pressure switch.
■ 1x digital air pressure gauge. ■ 1x digital air pressure gauge.
■ 2x 1/2-inch Teflon-lined braided air hoses. ■ 2x 1/2-inch Teflon-lined braided air hoses.
■ 2x 1/2-inch NPT fittings. ■ 2x 1/2-inch NPT fittings.
■ 2x 80A relay. ■ 2x 80A relay.
■ 2-year warranty ■ 4x 3/8" dual-manifold solenoid valves for F.B.S.S.
■ 1x AVS pre-wired clear switch box.
■ 2-year warranty
| 200PSI Dual-OB2 Basic OBA Kit |
| |
| 200PSI Dual-OB2 Pro OBA Kit |
| |
Specials
Grant Kustoms 95-04 Toyota Tacoma Tailgate skin w/ Plate Box
Grant Kustoms 95-04 Toyota Tacoma Tailgate skin w/box 9504-2 The plate box is on the lower right (Passenger) side and is strait.
I have one left. If you were to purchase directly from Grant Kustoms it would cost you almost $300 with shipping. Im letting this one go for $199 shipped to your door.
| GK Tacoma Skin w/Plate Box |
| |
Basic Front Starter Kit
Pictured above is an S10 front kit. You will receive the correct cups/brackets for your vehicle.
Kit Includes:
*Airlift Dominator D2500 Bags
*Cups/Bag Brackets
*40' of 1/2" DOT Airline
*Nickle PTC Fittings
The Granddaddy of all Front Kits
This kit has EVERYTHING that you will need to bag the front of your ride. Not just some of the stuff like the other guys have. No
more guessing what fittings you will need, We have figured all that out for you.
You get Upper & Lower Single Port Cups, Front Shock Relocating Kit, Two Dominator 2500 Bags, Two Asco 1/4" Dump Valves,
Two Asco 3/8" Fill Valves, 50' of D.O.T. Air Line, 50' of 1/8" Gauge Line, 5 Gallon eight 1/2 Port Tank, Two 3/8" SMC Water Traps,
Dual Pack Pewter 480c Compressors, One Single Needle KP Gauge, One Dual Needle KP Gauge, 10 Switch Box (Your Choice
of Color), Four 1/2" Line to 1/2" PTC 90* Fittings, Four 1/2" Line to 3/8"NPT PTC Fittings, Two Street T's with 1/8" port in the side,
Two 3/8" nipples, One 1/2" to 1/8" Reducer, Two 1/8" to 1/8" PTC 90* Fittings, One 1/4" Drain Cock, Two 1/2" to 1/4" Reducers,
Two SMC 3/8 Check Valves, Three 1/2" plugs, Three 1/8" to 1/4" Female, and Two 3/8" to 1/4" Reducers.
Granddaddy Rear Kit
This kit has EVERYTHING that you will need to bag the rear of your ride minus
4link, bridge kit, Notch, ect. Not just some of the stuff like the other guys offer.
No more guessing what fittings you will need, We have figured all that out for you.
This Kit includes: Two bags of your choice, two Asco 3/8" dump valves,
two Asco 1/4" fill valves, two SMC 3/8" check valves, two 3/8" street T's w/gauge port,
two 1/8" to 1/8" 90* fittings, two 1/2" to 3/8" fittings, two 1/2" to 1/4" fittings,
four 1/2" to 1/2" 90* fittings, two 3/8" nipples, two 3/8" to 1/4" reducers,
one KP dual needle gauge, two 1/8" to 1/8" female fittings.